Resistive Force Sensor Square 38.1MM Pressure Sensor (Spectrasymbol Original)

Rs. 399 Rs.599
33% Off

Highlights

  • Force sensitivity range: 10 kg, Stand-off resistance: > 1m?, Pressure sensitivity range: 150 psi, Device rise time: 1 – 2 msec, Life time: > 10 million actuations
  • Sensing area: 1.75x1.5 and ultra-thin thickness: 0.45 mm. Connector: 2-Pin Male Square Pin (Center Pin is inactive).
  • This Pressure Sensor can sense force anywhere in the range of 100g-10kg and can be easily integrated with Microcontrollers and development boards.
  • Range of Force sensor can be adjusted. Force Ranges (Standard): 4N (1lbs).

Brand :
Embeddinator

Availability :
In Stock


Share:

This is a Force sensitive resistor with a square, 1.75×1.5?,sensing area. This FSR 406 will vary its resistance depending on how much pressure is being applied to the sensing area. The harder the force, the lower the resistance. When no pressure is being applied to the FSR its resistance will be larger than 1M. This FSR can sense applied force anywhere in the range of 100g-10kg. Two pins extend from the bottom of the sensor with 0.1? pitch making it bread board friendly. There is a peel-and-stick rubber backing on the other side of the sensing area to mount the FSR. Just Connect a resistor to form a voltage divider and measure the voltage at the junction to find the force applied. These sensors are simple to set up and great for sensing pressure, but they aren’t incredibly accurate. Use them to sense if it’s being squeezed, but you may not want to use it as a scale. Dimensions: Overall length: 3.5? Overall width: 1.75? Sensing area: 1.75×1.5?

0 Review For Resistive Force Sensor Square 38.1MM Pressure Sensor (Spectrasymbol Original)
Add a review

Releted Products